Share to:

Sand Dust Test Chamber

Dust test chambers are capacity of 800 liters and 1000 liters. Considering that some specimens are smaller and less, so we designed and produced this small dust chambers.

Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others.

The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.

Availability:

Quantity:


Inquire Add to Basket

Model: DI-800/DI-1000/DI-1500/DI-2000
Brand: LIB

Product Description

Model	DI-800	DI-1000	DI-1500	DI-2000
Internal dimensions (mm)	80010001000	100010001000	100015001000	100020001000
Overall dimensions (mm)	104014501960	120014501960	125019001960	130024001960
Temperature range	Ambient to +50℃
Normal wire diameter	50um
Normal width of a gap between wire	75um
The Talcum powder amount	2kg ~ 4kg/m3
Fight time	0 ~ 99H59M
Fan cycle time	0 ~ 99H59M
Specimen power outlet	Dust-proof socket AC220V 16A
Controller	Programmable color LCD touch screen controller, Multi-language interface, Ethernet , USB
Vacuum system	Equipped with a pressure gauge, air filter, pressure regulator, connecting tube
Circulating fan	Enclosed alloy low-noise motor, multi-vane centrifugal fan
Heating system	Independent Nichrome electronic heating system
Exterior material	Steel Plate with protective coating
Interior material	SUS304 stainless steel
Safety System	Electric leakage, short circuit, Over-temperature, motor overheating Over-current protection/ Power failure memory function for controller
Power supply	380V 50HZ

Description

Dust test chambers are capacity of 800 liters and 1000 liters. Considering that some specimens are smaller and less, so we designed and produced this small dust chambers.

Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others.

The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.

Features

Small capacity of 800 liters and 1000 liters.

IP6X IP5X ingress testing

Dust blowing through special wind tunnel and air outlet

Constant dust concentration

Programmable color LCD touch screen controller

Multi-language interface

USB and Ethernet

A viewing window with wiper

Strong stainless steel specimen shelves

Build -in power interface and vacuum system for specimens

Internal illumination in test room